2010 Jeep Wrangler Drive Shaft Parts

Choose your Submodel for your 2010 Jeep Wrangler

Rubicon Sahara Sport Unlimited Rubicon Unlimited Sahara Unlimited Sport Unlimited X X

Showing 1 - 9 of 9 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2010 Jeep Wrangler Drive Shaft - Front Rubicon Express

36.50 in. Long RE1810 Adapter Required For Installation~Sold Separately~Req. PN[RE1883-365] For 07-11 Models w/Automatic Trans~Req. PN[RE1883-365] For Models 07-17 w/Manual Trans
CV Style Drive Shaft; Front; 36.50 in. Long;
CV Style Drive Shaft
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Horsepower Rating: Oem
Features:
- Compatible With RE1811 Slip Yoke Eliminator Kit
- Compatible With Atlas Transfer Cases
- Compatible With Any 1310 Series CV Yoke
- Measured Center To Center On Joint
- Measured With Slip Stub At Center Of Travel
- Measure w/Vehicle On Ground In Running Position
Spicer Drive Shafts And Components Are As Good As They Get. This Drive Shaft Is Compatible With Atlas Transfer Cases And Any Other 1310 Series CV Yoke. Measurements Are Taken Center To Center On The U-Joint With The Slip Stub At The Center Of Its Travel. Measure Your Vehicle On The Ground In The Running Position To Get Correct Length.

Additional Fitment Information:

Vehicle	Position	Sub Model
2010 - Jeep Wrangler	Front	Unlimited Sport

9 In Stock

$1,025.87 CAD

$1,231.04 CAD

Brand	Rubicon Express
Part #	R97RE1883-365
Condition	New
Warehouse	B

2010 Jeep Wrangler Drive Shaft - Front 6 Cyl 3.8L Fabtech

Steel
Drive Shaft; Front; Steel;
Drive Shaft
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
- Horsepower Rating: Oem
Features:
- Heavy Duty Replacement Driveshafts For Maximum
- Driveline Reliability
- Guarantee Superior Performance And Functionality
This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2010 - Jeep Wrangler	V	3778	Front	6 Cyl 3.8L	Unlimited Sport	231

33 In Stock

$1,156.24 CAD

$1,387.49 CAD

Brand	Fabtech
Part #	F37FTS94057
Condition	New
Warehouse	B

2010 Jeep Wrangler Drive Shaft - Rear Crown Automotive

Drive Shaft; Rear;
Drive Shaft
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: No
Features:
- Drive Shaft
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle	Position	Transmission Manuf. Code	Sub Model
2010 - Jeep Wrangler	Rear	42RLE	Rubicon

1 In Stock

$704.59 CAD

$845.51 CAD

Brand	Crown Automotive
Part #	C1Y68022107AC
Condition	New
Warehouse	B

2010 Jeep Wrangler Drive Shaft - Rear 6 Cyl 3.8L Fabtech

Heavy Duty
Drive Shaft; Rear; Heavy Duty;
Drive Shaft
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
- Horsepower Rating: Oem
Features:
- Heavy Duty Replacement Driveshafts For Maximum
- Driveline Reliability
- Guarantee Superior Performance And Functionality
This heavy duty double cardian front driveshaft has been designed to work in conjunction with our HD suspension systems. This specialty driveshaft has been built to provide vibration free driveline operation in 4WD high at highway speeds.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	Sub Model	CID
2010 - Jeep Wrangler	V	3778	Rear	6 Cyl 3.8L	Rubicon	231

1 In Stock

$1,269.39 CAD

$1,523.27 CAD

Brand	Fabtech
Part #	FTS94051
Condition	New
Warehouse	C

2010 Jeep Wrangler Drive Shaft Rubicon Express

Front And For Vehicles w/3.5 in or Greater Lift Height
Driveshaft Kit; Front And Rear; For Vehicles w/3.5 in or Greater Lift Height;
Driveshaft Kit
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Horsepower Rating: Oem
Features:
- Driveshaft Kit
Prevent Driveline Vibration After You Lift Your Jeep JK w. Our Dana Spicer 1310 CV Style JK Driveshafts. Designed To Replace The Factory Shafts And To Be Ran w. Our Replacement Yoke And Flange For The Transfer Case. Built For Daily Driving And The Demands Of Off Roading. Driveshaft Lengths Are For Factory Gasoline Motors.

Additional Fitment Information:

Vehicle	Sub Model
2010 - Jeep Wrangler	Rubicon

Brand	Rubicon Express
Part #	R97JK1803
Condition	New
Warehouse	B

2010 Jeep Wrangler Drive Shaft Rubicon Express

Front And For Vehicles w/3.5 in or Greater Lift Height
Driveshaft Kit; Front And Rear; For Vehicles w/3.5 in or Greater Lift Height;
Driveshaft Kit
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Horsepower Rating: Oem
Features:
- Driveshaft Kit
Prevent Driveline Vibration After You Lift Your Jeep JK w. Our Dana Spicer 1310 CV Style JK Driveshafts. Designed To Replace The Factory Shafts And To Be Ran w. Our Replacement Yoke And Flange For The Transfer Case. Built For Daily Driving And The Demands Of Off Roading. Driveshaft Lengths Are For Factory Gasoline Motors.

Additional Fitment Information:

Vehicle	Sub Model
2010 - Jeep Wrangler	Unlimited Sport

Brand	Rubicon Express
Part #	R97JK1802
Condition	New
Warehouse	B

2010 Jeep Wrangler Drive Shaft - Front Rough Country

For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 33.75 in.; Extended Length 37.25 in. Only Fits Dana 44 Front Axles~Install Time 2-3 Hours
CV Drive Shaft; Front; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 33.75 in.; Extended Length 37.25 in.;
CV Drive Shaft
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: No
- Horsepower Rating: Oem
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Eliminates Contact Between The Stock Drive Shaft And Oil Pan
- On Automatic Transmission Models
- Good Choice To Eliminate Vibration Issues
- Includes Brute Force Red Seals
- Includes Better Quality CV Joints
- Shaft Strength Is Twice As Strong As The Factory Drive Shaft
- Grease Fittings Are Out Of Way Of The Transmission Oil Pan
- Get Grease To The Joints That Need It And Not All Over The Bottom
This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.

Additional Fitment Information:

Vehicle	Position	Sub Model	Drive Type
2010 - Jeep Wrangler	Front	Unlimited Sport	4WD

Brand	Rough Country
Part #	5095.1
Condition	New
Warehouse	C

2010 Jeep Wrangler Drive Shaft - Rear Rough Country

For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 42.625 in.; Extended Length 46.125 in. Install Time 2-3 Hours
CV Drive Shaft; Rear; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 42.625 in.; Extended Length 46.125 in.;
CV Drive Shaft
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: No
- Horsepower Rating: Oem
Features:
- Collapsed Length: 42.625 in.
- Extended Length: 46.125 in.
- Good Choice To Eliminate Vibration Issues
- Includes Brute Force Red Seals
- Includes Better Quality CV Joints
- Shaft Strength Is Twice As Strong As The Factory Drive Shaft
- Grease Fittings Are Out Of The Way Of The Transmission Oil Pan
- Get Grease To The Joints That Need It And Not All Over The Bottom
This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.

Additional Fitment Information:

Vehicle	Position	Sub Model
2010 - Jeep Wrangler	Rear	Unlimited Sport

Brand	Rough Country
Part #	5099.1
Condition	New
Warehouse	C

2010 Jeep Wrangler Drive Shaft - Rear Rough Country

For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 23.875 in.; Extended Length 27.375 in. Install Time 2-3 Hours
CV Drive Shaft; Rear; For 3.5-6 in. Short Arm Lift Kits; For 2.5-6 in. Long Arm Lift Kits; Includes Flanges; Yokes; Hardware; Collapsed Length 23.875 in.; Extended Length 27.375 in.;
CV Drive Shaft
Product Attributes:
- Usage: Oem
- WARNING CA Proposition 65: No
- Horsepower Rating: Oem
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- Good Choice To Eliminate Vibration Issues
- Includes Brute Force Red Seals
- Includes Better Quality CV Joints
- Shaft Strength Is Twice As Strong As The Factory Drive Shaft
- Grease Fittings Are Out Of The Way Of The Transmission Oil Pan
- Get Grease To The Joints That Need It And Not All Over The Bottom
This double cardan style CV drive shaft is necessary for Jeep JK models equipped with 3.5in - 6in short arm suspension lifts or 2.5in - 6in long arm suspension lifts. It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard off the shelf mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.